S13 oil immersion transformer

Based on the original S11 type distribution transformer, the S11 distribution transformer is based on new materials, new processes research and autonomous innovation and technology introduction, to reduce airborne loss through optimized innovation design of core and coil structure. The purpose of noise. Self-developed products.

The anneaded loss decreased by 37%. Noise levels are more than 20% of the current national standard JB / T10088-2004, and the product performance level reaches the domestic advanced level.

Product introduction

The S13 ultra-low loss full sealing oil immersion power transformer is the new energy-saving transformer product of our company design and production.

All the S13 series products produced by our company use Shanghai Baosteel 0.23-0.30mmq system high-conducting magnets to silicon steel sheet manufacturing, and the high and low voltage windings are all copper foil and copper wire production.

The full-sealed corrugated piece fuel tank structure is used, and the economic benefits of running in the net.

The S13-type products produced by our company uses the manufacture of iron core technology, and the product has the characteristics of maintenance, convenient maintenance and stability operation.

The S13 power transformer is reduced by about 27% compared to the S11 type.

The positioning structure is designed inside to ensure that no shift is generated during transportation. At the same time, all fasteners are equipped with lock nuts to ensure that the product is not loose during long-term operation, and satisfying the core Requirements.

The full sealing structure is designed such that transformer body is isolated from air, prevents and slowing deterioration and moisture of transformer oil, enhancing operational reliability.

In safe design, a pressure relief valve, a signal thermometer, a gas relay, and the like ensure safe operation of the transformer.

After the surface of the fuel tank is removed, the oil is removed, and the phosphating is placed after three anti-paint (rain, moisture-proof, anti-salt fog), which can meet the special needs of moist and humid filth in metallurgical, petrochemical system.

The anneaded loss decreased by 37%. Noise levels are more than 20% of the current national standard JB / T10088-2004, and the product performance level reaches the domestic advanced level.

Conditions of Use

Category: Outdoor

Altitude: no more than 1000m

Ambient temperature: high temperature + 40 ° C, outdoor low temperature -25 ° C

Installation site: no corrosive gas, no obvious dirt

Execution standard

GB1094.1-2-1996 Power Transformer

GB1094.3-5-2003 Power transformer

Technical parameters and requirements of three-phase oil immersion power transformer.

Model meaning 

技术参数